3.18
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
10.Verify the fuel line connection is clean and free of
debris. Place the fuel line back over the fitting and
slide the connector locking mechanism
i
back into
place. Verify the connector tabs snap back into place
by pulling out lightly on connector.
11. Install engine intake hose to throttle body. Torque
clamp to specification.
TORQUE
Intake Duct Hose Clamp:
35 in-lbs (4 Nm)
12.Perform ETC Learn Procedure, page 4.27,
connecting battery as needed.
13.Inspect engine while running to watch for any fuel
leaks.
14.Perform Cargo Box Installation, page 10.24.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
