3
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
3.21
ENGINE REMOVAL
1. Disconnect the battery.
2. Drain coolant and engine oil. See Engine Oil and
Filter Replacement, page 2.34 and Coolant
Replacement, page 2.41.
3. Remove rear cargo box. See Cargo Box Removal,
page 10.24.
4. Disconnect Ignition Coil.
5. Disconnect oxygen sensor
q
.
6. Remove three fasteners
w
retaining the upper heat
shield to the head pipe. Remove the upper heat
shield.
IMPORTANT
DO NOT remove large heat shield secured to the close
off panel.
7. Remove six fasteners
e
retaining the head pipe to
the cylinder head.
8. Remove the thermostat housing hose
r
and the
water pump hose
t
.
9. Disconnect stator harness and disconnect the
harness retainer from the engine mount.
10.Disconnect the fuel supply
y
at the fuel rail.
IMPORTANT
Place a shop towel around the fuel line to catch any
dripping fuel.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
