3.56
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
9. The table below lists the big end bore diameter
specifications.
Bearing Selection Chart — Rod Bearings
CONNECTING ROD BIG END BORE
DIAMETERS
1 2
3
1.7318 -
1.7321"
(43.989 -
43.996 mm)
1.7321 -
1.7323"
(43.996 -
44.003 mm)
1.7323 -
1.7326"
(44.003 -
44.010 mm)
10.Whether using new connecting rods or re-installing
the original ones, refer to the bearing selection chart
provided in the “Connecting Rod Bearing
Selection”, page 3.58 procedure in this chapter.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
