Polaris RANGER XP 1000 2018 - Page 198

3.106
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
Expansion Valve: The expansion valve
t
controls the
amount of refrigerant entering the evaporator coil.
Heater / Evaporator Unit: The heater / evaporator unit
y
is located below the dash on the passenger side. The
unit delivers the cold air for the A/C and warm air for heat
into the cab. The unit contains the heat and A/C coils,
thermostat, and expansion valve.
Heater Coil: The heater coil
u
supplies the warm air into
the cab by passing air through the coil.
Evaporator Coil: The evaporator coil
i
cools and
dehumidifies the air before it enters the cab.
Thermostat: The thermostat
o
and probe
a
controls
the temperature of the evaporator coil.
Heater / Evaporator Blower: The blower
s
is used to
pull air through the heater and evaporator coils and into
the cab.
Control Panel: The panel has three separate
components.
ENGINE / COOLING / EXHAUST