Polaris RANGER XP 1000 2018 - Digital Wrench Serial Number Location; Digital Wrench Version and Update ID; Digital Wrench Updates

4.50
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
DIGITAL WRENCH® SERIAL NUMBER
LOCATION
Open the configuration screen by clicking on the wrench
icon. The serial number is located on the right side of the
screen.
DIGITAL WRENCH® VERSION AND UPDATE
ID
Knowing what Digital Wrench® version and update is
installed will help determine which updates are required.
NOTE
Versions and updates are subject to change.
1. Open the Digital Wrench® software. Locate the
version ID shown on the lower right side of the Digital
Wrench® start-up screen.
2. Proceed to http://polaris. diagsys. com to see if a
newer update is available.
3. If a newer update is available, it should be
downloaded before using Digital Wrench®.
NOTE
Always operate with the latest update.
DIGITAL WRENCH® UPDATES
Updates are released for Digital Wrench® via the
Internet at: http://polaris. diagsys. com. The Digital
Wrench® website can also be accessed through the
dealer website at: www.polarisdealers.com.
NOTE
Only authorized Polaris dealers and distributors can
access the dealer website.
1. Log on to www.polarisdealers.com.
2. Locate the “Service and Warranty” drop-down
menu.
3. Click on “Digital Wrench Updates”.
4. The Digital Wrench® portal website should appear in
a new web browser.
FUEL SYSTEM