6.10
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
10.With the transmission in neutral, remove two bolts
securing the Rear Prop Shaft to the transmission.
NOTE
To aid in removal, rotate prop shaft to access bolts
11. Loosen and remove intake clamps to TPS
e
and
retaining intake manifold
r
to engine.
12.Remove lower manifold mounting fastener to
transmission mount bracket.
13.Disconnect the transmission shift cable by removing
the clip and sliding the washer and shift cable off the
bellcrank.
14.Mark the location of the shift cable and upper jam nut
y
. Loosen the lower jam nut
t
and remove the shift
cable assembly from the bracket.
15.Place a piece of 1x4 wood under the engine to
support it. Remove the rear transmission isolator
fasteners
u
.
TRANSMISSION
To Next Page
Loading...
