8.20
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
REAR LOWER A-ARM REMOVAL
1. Properly lift and support the vehicle by the frame.
2. Remove the four nuts retaining the rear stabilizer bar
to the frame.
3. Remove the nut
q
from the lower portion of the
stabilizer bar link.
4. Remove the four wheel nuts and remove the wheel.
5. Remove the fastener
w
retaining the lower portion of
the rear shock to the lower A-arm.
6. Remove the fastener retaining the lower A-arm to the
bearing carrier and frame.
7. Remove the lower A-arm from the vehicle.
STEERING / SUSPENSION
To Next Page
Loading...
