6. Store the battery in a dry area with a temperature of 32° to 90° F (0° to 32°
C).
7. While in storage, fully charge the battery once a month.
REMOVAL FROM STORAGE
1. Remove the fabric cover.
2. Remove intake and exhaust opening covers (if covered for storage).
3. Install the tires. Lower the vehicle and remove the jack stands.
4. Verify that tire pressure is at specification. Refer to safety labels on the
vehicle or to the specifications section beginning on page 121.
5. Install the battery and perform an electrical inspection.
6. Inspect the spark plugs. Install new spark plugs if necessary.
7. If the vehicle was stored in an area subject to wide swings in temperature
and humidity (such as outdoors), change the engine oil before starting the
engine.
NOTICE
During storage, temperature and humidity changes can cause condensation to
form in the crankcase and mix with engine oil. Running the engine with oil that
contains condensation can cause engine damage.
8. Inspect the storage area for signs of fluid leaks. Identify and perform service
to any leaking components.
9. Wash and polish the vehicle. Wax, polish or apply protectant to appropriate
components.
10. Perform the pre-ride inspections. See page 47.
11. Check any fluid levels not included in the pre-ride inspection.
113
CLEANING AND STORAGE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
