HEADLIGHT HIGH/LOW BEAM SWITCH
The headlights are always on when the ignition switch is in the ON position. To
switch the headlights between low beam and high beam, tap the turn signal
lever forward, toward the steering wheel. The master lighting switch (Canada)
must be in the ON position to allow operation of the high beam headlights. See
page 23.
TURN SIGNAL LEVER
Before turning, activate a turn signal to alert others of your intentions. Check turn
signal lamps before each ride.
NOTE
The key must be in the ON position to activate the turn signals.
1. Move the turn signal lever downward to signal a left turn. The left turn signal
lamps at the front and rear of the vehicle will flash. The indicator arrows on
the console will flash when a turn signal or hazard signal is activated.
2. Move the lever upward to signal a right turn. The right signal lamps and
indicator will flash.
3. The turn signal automatically cancels and the lever returns to the center
position when the turn is completed.
CRUISE CONTROL SWITCHES
The cruise control switch
q
and set button
w
are located on the turn signal lever.
Before using the cruise control, read the safety and operation procedures. See
page 61.
22
FEATURES AND CONTROLS
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
