REAR SUSPENSION
1. Check rear shock absorber movement to ensure the correct amount of
suspension travel and ground clearance. Refer to the specifications section
beginning on page 121.
WARNING
Inadequate ground clearance could result in components contacting the
ground, causing loss of control and serious injury or death. Always ensure
ground clearance is at specification.
DRIVE BELT
1. Check the drive belt
q
teeth for stones or other debris.
2. Inspect drive belt condition. If you discover cracks, broken teeth or frayed
edges, replace the drive belt before riding. Refer to the SLINGSHOT Service
Manual , or an authorized dealer can assist.
50
PRE-RIDE INSPECTIONS
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
