BODY / STEERING / S USPENSION
5.1
TORQUE SPECIFICATIONS
Front A-Arm Attaching Bolt 30 ft. lbs. (41 Nm).................
Front A-Arm Ball Joint Stud Nut 25 ft. lbs. (35 Nm).............
Handlebar Adjuster Block 10-12 ft. lbs. (14-17 Nm)...................
Master Cylinder 45-55 in. lbs. (5.2-6.3 Nm)...........................
Rear Shock Bolt (upper) 30 ft. lbs. (41 Nm)....................
Rear Shock Bolt (lower) 30 ft. lbs. (41 Nm)....................
Rear Wheel Hub Nut 100 ft. lbs. (136 Nm)......................
Rear Wheel Nuts 20 ft. lbs. (27 Nm)..........................
Upper Stabilizer Support Nut 17 ft. lbs. (24 Nm)................
Upper Control Arm Mounting Bolt 35 ft. lbs. (48 Nm)............
Lower Control Arm Mounting Bolt 30 ft. lbs. (41 Nm)............
Upper Wheel Bearing Carrier Bolt 35 ft. lbs. (48 Nm)...........
Lower Wheel Bearing Carrier Bolt 30 ft. lbs. (41 Nm)...........
Strut Rod Retaining Nut (Top) 15 ft. lbs. (21 Nm)...............
Strut Casting Pinch Bolt 15 ft. lbs. (21 Nm)....................
T ie Rod End Jam Nut 12-14 ft. lbs. (17-19 Nm)......................
T ie Rod End Castle Nut 40-45 ft. lbs. (54-61 Nm)....................
T ie Rod End Attaching Bolt 25-30 ft. lbs. (35-41 Nm).................
NOTE: Refer to exploded views throughout this chapter for identification and location of components.
SPECIAL TOOLS
Description Part No.
Strut and Ball Joint Tool Set 2870871..........
Shock Spanner Wrench 2870872.............
Shock Spring Compressor Tool 2870623.......
Strut Rod Holding Wrench 2871572...........
Strut Spring Compressor Tool (LH) 2871573...
Strut Spring Compressor Tool (RH) 2871574...
Optional Fox™ Shock Tools
Body Holding Tool 2871017..................
Safety Needle 7052069......................
Shock Spring Compressor Tool 2870623.......
Gas Shock Recharging Kit 2200421...........
Damper Rod Holding Tool 2871352...........
Fox™ Shock IFP Tool 2871351...............
To Next Page
Loading...
