MAINTENANCE
2.3
RECOMMENDED LUBRICANTS - QUICK REFERENCE
LUBRICANTS AND MAINTENANCE PRODUCT PART NUMBERS ARE LISTED ON PAGE 2.4. REFER
TO SPECIFICATIONS CHAPTER 1 FOR CAPACITY INFORMA
TION.
Item
Type Notes See
Pages
Engine Oil Polaris Premium 4
Synthetic, 0W/40
Add to proper level on dipstick. 2.26-2.27
T ransmission Polaris Synthetic Gear
Case Lubricant
Refer to procedures outlined later in this
chapter.
2.10
Front Gear Case Premium Front Gearcase
Fluid or GL5 80-90 Gear
Lube
Refer to procedures outlined later in this
chapter.
2.9
Gear Shift Selector
Box
Polaris 0W/40 Synthetic
Engine Lubricant or
10W Motor Oil
Oil in selector box should be at the center
line of the shift selector plungers. Do not
overfill or the selector may hydro-lock.
8.4
Coolant Level Polaris Premium 60/40
Pre-mixed Antifreeze/
Coolant or a 50/50 mixture
high quality antifreeze/
coolant and distilled water
Fill reservoir tank to full line. Add if neces-
sary. If reservoir was empty or extremely
low, allow engine and cooling system to
cool completely and check level in radia-
tor. Fill to top of filler neck.
2.22
Front Hubs Premium Demand Drive
Hub Fluid
Fill hub at 4:00 or 8:00 position until fluid
trickles out. Do not force fluid into hub.
2.33
Brake Fluid Polaris DOT 3 Brake Fluid Fill to indicated level inside reservoir. 2.35
COLD WEATHER KITS FOR 4 CYCLE ATVS
Oil Tank Cover -- PN 287187
Engine Heater -- PN 2871507
Oil Tank Heater -- PN 2871873
To Next Page
Loading...
