50
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the vehicle is in safe operating
condition before operating increases the risk of an accident. Always
inspect the vehicle before each use to make sure it's in safe operating
condition.
Item Remarks Page
Passenger seat latch Ensure latch is secure 30
Brake system/lever travel Ensure proper operation 25
99
Brake fluid Ensure proper level 26
Auxiliary brake Ensure proper operation 28
Front suspension Inspect, lubricate if necessary 86
Rear suspension Inspect, lubricate if necessary 86
Steering/steering lock Unlock the steering; ensure free oper-
ation
31
Steering Ensure free operation -
Tires Inspect condition and pressure 104
Wheels/fasteners Inspect, ensure fastener tightness 106
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 31
87
Coolant level Ensure proper level 97
98
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 24
126
Switches Ensure operation 21
Engine stop switch Ensure proper operation 22
Mirrors Adjust for best side/rear vision 24
Turn signals, indicators Ensure operation 22
Air filter, pre-filter Inspect, clean 107
Headlamp Check operation 23
109
Brake light/taillight Check operation 113
Riding gear Wear approved helmet, goggles, and
protective clothing
16
ADC Fluid Ensure proper level 93
Winch Inspect cable and switch. 69-80
Downloaded from ManualsNet.com search engine