Polaris SPORTSMAN 600 2003 - Transmission Disassembly Cont’d

TRANSMISSION
TRANSMISSION
8.6
TRANSMISSION DISASSEMBLY CONT’D
3. Remove the e--clip and then remove the
transmission switch.
Transmission
Switch
4. Remove the five bolts that secure the cover.
Remove the detent spring.
Spring
5. Mark the detent gear with a white pen. Remove the
detent gear from the case.
NOTE: It may be helpful to place a mark just above
the keyed spline.
6. Mark the shift lockout disc, this will indicate which
sideof the disc faces outward during assembly.
Remove the shift lockout disc.
NOTE: It may be helpful to place a mark just above
the keyed spline.
7. Remove the shift shaft and detent lever.
8. Note the timing marks on the shift gears. Remove
the shift gears from the case.
Enfocus Software - Customer Support