CLUTCH
6.20
contact the inside of the rollers. Do not lubricate the
rollerorrollerpin.
Roller
Dry Locking
Agent Applied
To New Screws
Apply Loctitet
680 To Tapered
Portion Of Screw
Heat Area
Lightly
7. Inspect moveable sheave bushing for wear.
Inspect BOTH sheaves for signs of wear,
grooving or cracking. Clean surfaces with a 3Mt
pad if needed
Moveable Sheave Bushing Inspection:
Replace the bushing if more brass than
Teflont is visible on the surface of the
bushing.
8. Check for movement of the shaft in the one-way
clutch. If the shaft can be moved laterally, or if the
one-way clutch does not function properly as
described in Step 1 and 2 on Page 6.18, replace
driven clutch assembly.
To Next Page
Loading...
