107
MAINTENANCE AND LUBRICATION
PVT System
WARNING
The PVT system rotate s at high speeds, creating large amounts
of force on clutch components. Extensive engineering and
testing has been conducted to insure the safety of this product.
However, as the owner you have the following responsibilities to
make sure this syst em remains safe:
D Do not modify any component of the PVT system. Doing so may
reduce its strength so that a failure may occur at high speeds.
This system has been precision balanced. Any modification will
cause the system to be out of balance, creating vibration and
additional loads on components.
D Routine maintenance is the responsibility of the owner. Always
follow recommended maintenance procedures. See your deal-
er!
D This PVT system is intended for use on Polaris products only.
D The PVT housing must be securely in place during operation.
Failure to comply with this warning can result in severe injury
or death.
To Next Page
Loading...
