MAINTENANCE
2.31
G The use of non-standard size or type
tires may affect ATV handling.
Tire Tread Depth
Always replace tires when tread depth is worn to
1/8″ (3 mm) or less.
Tread
Depth 1/8I (3 mm)
WARNING
Operating an ATV with worn tires will increase
the possibility of the vehicle skidding and pos-
sible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8″ (.3 cm) or less.
FRAME, NUTS, BOLTS,
F
ASTENERS
Periodically inspect the torque of all fasteners in
accordance with the maintenance schedule. Check
that all cotter pins are in place. Refer to specific
fastener torques listed in each chapter.
WARN WINCH OPERATION
(SPORTSMAN
HUNTER
EDITION)
The Sportsman Hunter package is equipped with a
2500 lb. (2.5chi) Warn Winch in the front.
Winch Handlebar
Controls
The winch is located in the front bumper area.
The mini--rocker (IN/OUT) control controls the
direction of the cable for the winch. IN pulls the cable
into the winch and OUT feeds the cable out of the
winch.
Mini--Rocker Switch
IN
OUT
Winch Control
The winch control located on the side of the winch
gives the operator easy access to switch between
ENGAGED and FREESPOOL.
When the winch is ENGAGED, the winch only allows
the cable to be pulled IN or released OUT via the
mini--rocker switch on the handlebar.
To Next Page
Loading...
