3
3.47
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
23. Inspect the crankshaft gear (Q) for broken or worn
teeth. If the crankshaft gear does not need to be
replaced, it does not need to be removed. If the
crankshaft gear is damaged, remove the crankshaft
gear with the Flywheel Puller (PN 2871043).
24. Install the two puller bolts (R). Tighten the puller bolts
up so that the bolts are at equal length.
25. Install the Flywheel Puller (PN 2871043) and remove
the crankshaft gear, if needed.
26. Rotate the water/oil pump gear (S), so that all four
bolts are visible though the gear. Remove the four
bolts with a hex wrench. Pull out the pump.
ENGINE
To Next Page
Loading...
