8
8.37
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
25. Install the shift shaft and the detent star. Note the
keyed spline on the end of the shaft.
26. Install the detent pawl and spring. Install a new o-ring
onto the shift shaft after the detent pawl is
assembled to the shaft. Place a small amount of
grease on the small o-ring on the shift shaft and on
the detent star. Grease the o-ring on the end of the
shift drum.
27. Apply Crankcase Sealant (PN 2871557) onto the
cover and case mating surfaces. Install the cover
and hand tighten all of the bolts.
28. Tighten bottom left corner bolt first. This helps to
align the cover and shafts to ensure smoother and
precise shifting. Torque the bolt to specification.
29. Torque the remaining bolts to specification.
Cover Bolt:
6-12 ft-lbs (12-16 Nm)
TRANSMISSION
To Next Page
Loading...
