3
3.49
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
31. Carefully press the gear off the assembly while
supporting the housing assembly.
CAUTION
Wear appropriate safety gear during this procedure.
Protective gloves, clothing and eyewear are required.
32. Remove the snap ring from the assembly. Place the
housing in a support and press out the bearing/shaft
assembly.
33. Place the shaft in a press to remove the bearing.
Discard original bearing
34. Press shaft into the new bearing.
35. Press the bearing/shaft assembly using the bearing's
outer race. Do not use the shaft to press the
assembly into the housing, as bearing damage may
result. Install retaining ring.
ENGINE
To Next Page
Loading...
