Polaris Sportsman 800 EFI 4x4 2014 - Page 283

7
7.17
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
12. Be sure the armature plate tabs are fully engaged
into the roll cage assembly and are resting on the
cut-grooves of the ring gear.
NOTE: Verify armature plate tabs are in the slots
on the roll cage and are resting in the ring gear
grooves.
13. Install the output hub and cover plate assembly with
a new o-ring (arrow) onto the gearcase.
NOTE: Verify the square O-ring (arrow) is placed
flat on the cover surface. If the O-ring is twisted,
fluid leaks may occur.
14. Torque the cover plate bolts to specification.
Output Cover Bolt:
9 ft-lbs (12 Nm)
15. Lay the gearcase on the side with the output cover
facing up.
FINAL DRIVE