7.28
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
4. Remove the outer cover plate assembly. Remove
and inspect the cover o-ring (A). Replace items as
required.
IMPORTANT: Thrust bearing (2) located between
the two output assemblies is pressed into the
clutch pack and is not removable.
5. Remove the output clutch assembly. Inspect thrust
bearing (B) for wear. Inspect the bearings, contact
surfaces and splines of the output clutch for signs of
wear or damage. Visually inspect the clutch plate
area. If plates are steel-on-steel, or if the friction
material is worn, the assembly should be replaced.
IMPORTANT: Excessive debris in the oil and/or
noise coming from the front drive on
deceleration are key indicators of clutch pack
failure. Replace clutch as an assembly if found to
be worn or damaged.
6. Remove the armature plate (C). Inspect the armature
plate for wear, distortion or other damage. Replace
component as required.
FINAL DRIVE
To Next Page
Loading...
