2.22
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
Spark Plug
1. Clean plug area so no dirt and debris can fall into
engine when plug is removed. Remove spark plug
high tension lead.
2. Remove spark plug.
3. Inspect electrodes for wear and carbon buildup. Look
for a sharp outer edge with no rounding or erosion of
the electrodes.
4. Clean with electrical contact cleaner or a glass bead
spark plug cleaner only.
CAUTION
A wire brush or coated abrasive should not
be used for cleaning spark plugs.
5. Measure gap with a wire gauge. Refer to
specifications for proper spark plug type and gap.
Adjust gap if necessary by bending the side
electrode carefully.
6. If necessary, replace spark plug with proper type.
WARNING
Severe engine damage may occur if the incorrect spark
plug is used.
7. Apply a small amount of anti-seize compound to the
spark plug threads.
8. Install spark plug and torque to specification.
Spark Plug:
18 ft-lbs (24 Nm)
MAINTENANCE
To Next Page
Loading...
