TAILLIGHT / BRAKELIGHT LAMP REPLACEMENT
1. Remove the harness connector
w
from the back of the light assembly
q
.
2. Turn the lamp counter-clockwise to
remove it.
3. Apply dielectric grease to the socket
and install the new lamp.
4. Reinstall the harness connector
w
.
5. Test the light for proper operation.
SPARK PLUGS
SPARK PLUG RECOMMENDATIONS
Refer to the specifications section for the recommended spark plug type and
gap for your vehicle. Torque spark plugs to specification.
NOTICE
Using non-recommended spark plugs can result in serious engine damage.
Always use POLARIS-recommended spark plugs or their equivalent.
PLUG CONDITION TORQUE SPECIFICATION
New Spark Plug 18-20 ft-lbs
(24-27 Nm)
Previously Installed Spark Plug 18-20 ft-lbs
(24-27 Nm)
93
MAINTENANCE
To Next Page
Loading...
