3
3.65
PISTON-TO-CYLINDER CLEARANCE
Measure piston outside diameter at a point 33 mm down
from piston crown, at a right angle to piston pin bore.
Subtract measurement from maximum measurement
obtained in Step 6 of Cylinder Inspection.
Piston to Cylinder Clearance:
.0013 ± .0008" (.033 ± .02 mm)
Piston O.D. (Standard):
3.4239 ± .0008" (86.967 ± .02 mm)
ENGINE / COOLING SYSTEM
To Next Page
Loading...
