7
7.27
4. Loosely install the two screws and flange nuts that
attach the lower steering post assembly to the frame.
5. Loosely install the bolts retaining the lower steering
post assembly to the front gearcase.
TORQUE
Steering Post to Front Gearcase Fasteners:
18 ft. lbs (24 Nm)
Lower Steering Post-to-Frame Fasteners:
18 ft. lbs (24 Nm)
6. Install the steering tie rod ends into the steering frog.
Torque the tie rod end fasteners
q
and
w
to
specification and install new cotter pins.
TORQUE
Tie Rods to Steering Frog:
42 ft. lbs (58 Nm)
7. Install the vent line and the (4) bolts that secure the
front gearcase to frame. Torque bolts to specification.
TORQUE
Front Gearcase Mounting Bolts:
36 ft. lbs (49 Nm)
FINAL DRIVE
To Next Page
Loading...
