7
7.53
6. Torque wheel hub nut to specification and install a
new cotter pin. Tighten nut slightly if necessary to
align cotter pin holes.
TORQUE
Wheel Hub Castle Nut:
80 ft. lbs (108 Nm)
7. Install the rear wheel and (4) wheel nuts. Torque
wheel nuts to specification.
TORQUE
Wheel Nuts:
Steel Wheels: 45 ft. lbs (61 Nm)
Aluminum Wheels: 75 ft. lbs (102 Nm)
8. Rotate wheel and check for smooth operation. Bend
both ends of cotter pin around end of spindle in
different directions.
FINAL DRIVE
To Next Page
Loading...
