2
2.7
GREASE LUBRICATION POINTS
There are grease fittings on each upper and lower front and rear A-arms, each rear bearing carrier, and on the front
prop shaft yoke. Apply grease until all traces of water have been purged out at each of these areas.
ITEM RECOMMENDED LUBE METHOD
FREQUENCY
q
Front Propshaft
Yoke
Polaris Premium U-Joint Grease
Grease fittings every 500
miles (800 km).
Grease before long periods
of storage, and after
thoroughly washing or
submerging the ATV.
w
Rear Bearing
Carrier
e
Front A-Arms
r
Rear A-Arms
MAINTENANCE
To Next Page
Loading...
