9.24
12. Torque wheel hub nut to specification and install a
new cotter pin. Tighten nut slightly if necessary to
align cotter pin holes.
TORQUE
Wheel Hub Castle Nut:
80 ft. lbs (108 Nm)
13. Install the wheel and (4) wheel nuts. Torque wheel
nuts to specification.
TORQUE
Lug Nuts
Aluminum Wheels: 75 ft. lbs (102 Nm)
Steel Wheels: 45 ft. lbs (61 Nm)
14. Field test the ATV for proper braking action before
putting into service. Inspect for fluid leaks and firm
brakes. Make sure the brake is not dragging when
lever is released. If the brake drags, re-check
assembly and installation.
BRAKE SYSTEM
To Next Page
Loading...
