11
11.17
INFORMATION DISPLAY AREA
The LCD portion of the instrument cluster is the
information display area. Information displayed in this
area includes: odometer, trip meters, engine RPM,
engine hours, service interval, clock, engine Diagnostic
Trouble Codes (DTCs) and power steering DTCs.
The reverse override button on the LH control acts as the
MODE button when pressed and released quickly. The
transmission cannot be in reverse when using the
override button as a MODE button.
Odometer
The odometer records and displays the total distance
traveled by the ATV. The odometer can not be reset.
Trip Meters (Trip 1 / Trip 2)
The trip meters records the miles traveled by the ATV on
each trip. To reset the trip meters:
1. Toggle the MODE button to Trip 1.
2. To reset to 0, push and hold the MODE button until
the distance display changes to 0.
3. Perform this same procedure to reset Trip 2.
Tachometer (RPM)
Engine RPM can be displayed digitally.
Engine Hours
Engine hours are logged anytime the engine is running.
Total hours can not be reset.
ELECTRICAL
To Next Page
Loading...
