Polaris Sportsman XP 1000 S 2020 - Page 280

6.22
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
6. Install clutch onto holding fixture and secure in a
bench vice. Torque spider
o
to specification using
the holding fixture and spider tool
i
.
Drive Clutch Holding Fixture
2871358-B
Drive Clutch Spider Removal and Installation Tool
2870341
TORQUE
Spider Assembly
290 ft-lbs (393 N·m)
7. Install shift weights using new lock nuts on the bolts.
8. Reinstall clutch spring
a
and limiter spacer
s
.
9. Reinstall cover
f
, aligning “X” mark with other marks.
IMPORTANT
If the aligning marks are not in alignment, the clutch will
not be in balance. The drive clutch assembly must be
replaced.
10.Torque bolts
d
evenly to specification.
TORQUE
Drive Clutch Cover Bolts
8 ft-lbs (11 N·m)
PVT SYSTEM