Polaris trail boss 325 User Manual

118
MAINTENANCE
Breather Filter and Hose - 4-Cycle Engines With Dry
Sump*
1. Remove the clamps and
pull the filter out of the
hoses. NOTE: It will
not
be necessary to
remove the lower hose
from the engine.
2. Inspect filter for debris.
Blow through gently in
direction of arrow on
filter to check for
clogging. Replace as
needed.
3. Check hoses for cracks, deterioration, abrasion, or leaks.
Replace as needed.
4. Reinstall filter and clamps with arrow pointing toward engine.
* Refer to your owner ’s manual supplement to determine if your
machine has a dry sump.
Operation of your ATV without a b reather filter can cause en-
gine damage.
Breather
Filter

Polaris trail boss 325 Specifications

General

Brand	Polaris
Model	trail boss 325
Category	Offroad Vehicle
Language	English