EasyManuals Logo

Polaris trail boss 325 User Manual

Polaris trail boss 325
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
136
MAINTENANCE
Oil Filter and Change (Cont.)
Magnum 325 2x4, Magnum 325 4x4, Trail Boss
12. Re move dipstick and fill sump with 2 quarts (1.9 l) of Polaris
Premium 4 synthetic oil.
13. Place gear selector in neutral and set parking brake.
14. Start the engine and let it idle for one to two minutes. Stop the
engine and inspect for leaks.
15. Re-check the oil level on the dipstick and add oil as necessary
to bring the level to the upper mark on the dipstick.
16. Dispose of used filter and oil properly.
NOTE: Drain Plug Torque: 14 ft. lbs. (19 Nm); Oil Filter Torque:
Turn by hand until filter gasket contacts the sealing surface, then
turn an additional 1/2 turn.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris trail boss 325 and is the answer not in the manual?

Polaris trail boss 325 Specifications

General IconGeneral
BrandPolaris
Modeltrail boss 325
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals