Polaroid 539957-020 Rev. A - Chapter 4: Printing Cards

39
Chapter 4: Printing Cards
This section explains how to:
• Print a card to a printer with an input hopper. See “Printing Cards: Printer
with Input Hopper” for details.
• Print on both sides of a card. See “How to Print on Both Sides of the Card”
for details.
• Print a sample card. “How to Print Driver Sample Cards” for details.
Make sure:
• The printer system is set up. See “Printer System” for details.
• The card design is set up. See “Card Design and Setup” if you need to set up
the design.
• Ribbon is loaded in the printer. See “How to Load Ribbon” for the steps to
follow.
HINTS & TIPS
Make sure magnetic stripe cards are inserted correctly. The printer shows the
correct position.
You can also print a test card from the printer. See “How to Print a Printer Test
Card”.