54 Using the Printer
Message 112: Card hopper empty
The printer does not detect cards in the input hopper.
1. Open the input hopper.
2. Insert cards in the input hopper. Cards can stick
together: Slide or fan cards to separate the edges
before loading the input hopper.
3. Close the input hopper and resume printing.
HINTS & TIPS
• Orient all cards the same way.
• Do not touch the card surface to be printed:
• Handle cards by their edges
• Wear gloves
Message 113: Close cover to continue
The printer cover must be closed to print.
1. Close the cover.
2. Push down on the cover to latch it.
Hints & Tips
• Make sure the ribbon cartridge is installed.
• Make sure the cartridge handle is even with the
edges of the printer.
Message 114: Cover opened during job
The printer cover must be closed to print.
1. Close the cover.
2. Push down on the corners of the cover to latch it.
Hints & Tips
• Make sure the ribbon cartridge is installed and the
handle is even with the edges of the printer.
• The card, if it started to print, should be discarded.
To Next Page
Loading...
