• Setting the Self-timer
Your camera is designed with a self timer function which will allow you to
take pictures with a count down of 2 or 10 seconds.
1. Press the button to set the camera to Still Image mode.
2. Press the button to select self-timer.
Display Option Description
Off Single shot Record a single image
2
2-Second Take a picture after a count down of 2 seconds
10
10-Second Take a picture after a count down of 10 seconds
Burst
Press and hold the shutter button to take four pictures in
succession
3. Capture procedures are the same as for taking a picture in the normal
capture mode. See page 28.
NOTE:
• This feature is only available in Still Image mode.
• Place the camera on a at surface or use a tripod when using the self-timer
function.
To Next Page
Loading...
