Make sure the batteries have been inserted properly into your digital camcorder.
Make sure the Micro SD card has been inserted properly into your camcorder.
(Micro SD card up to 32GB - not included)
Please see Initial Camera Setup for more information.
Press and hold the Power button to turn your camcorder ON.
After powering on, the LCD screen turns on with your camcorder in Video Capture mode to start.
While the camcorder is on, you can press and hold the Power button down again for a few
seconds at any point to turn your camcorder OFF.
Note: Your digital camcorder also has an Auto Power Off feature that automatically turns off your
camcorder after a specific period of time that your camera is left idle. The Auto Power Off settings
can be set from the ‘Auto Power Off’ Camera settings menu (accessed in either Photo Capture
Mode or Video Capture Mode general Camera Settings menu).
To Next Page
Loading...
