Polaroid iD642

23
Effects
The Effect menu allows you to select a
unique effect that can create an
interesting look to your image.
Normal (default)
Negative
Normal
B/W
Sepia
Effects setting
Sharpness
You can set the level of sharpness in the
images taken with your camera. The
sharpness level dictates if the edges of
objects in the image are more or less
distinct.
Standard
Hard
Soft
Sharpness setting
EV Setting
The Light Exposure setting helps you
control the amount of light that enters
your camera’s lens. This setting should
be adjusted when the environment is
lighter or darker than normal.
When the environment has more light
than is needed, reduce the exposure
setting (by using the negative - count) to
reduce the amount of light allowed into
the lens by your camera.
If the environment has less light (darker)
than is needed, increase the exposure
setting (by using the positive + count) to
increase the amount of light allowed into
the lens by your camera.
0
+/-0.3
+/-0.7
+/-1.0,
+/-1.3
+/-1.7
+/-2.0
Level of exposure
To enter the general settings for your camcorder:
1) Once in Video or Photo Capture Mode, press the MENU button.
2) Press the UP button or the DOWN button to select and highlight the Setup icon.
3) Press the OK/Shutter button to enter the camcorder ‘Setup’ menus.