30
Chapter 3 Using the LCD TV
If you want to install the channels by yourself, using the▲/▼buttons to highlight the channel
installation (manual) option, and press ok to install manually. First you should choose the
installation type, then you can see the following menu. Using
◄/► to cycle the channel option,
then the bar graphs of signal level and signal quality will indicate whether any channels are likely
to be found. You should choose the channel of which the signal quality bar is high as well, then
press OK button to scan the channels.
NEW DETECTED CHANNELS
The New Detected Channels menu shows the channels that you add in the channel list
recently. The type icon of the program is displayed against the channel name.
Using the DTV OSD Settings
To Next Page
Loading...
Need help?
General
