• Setting Self-timer
Your camera is designed with a self-timer function which allows you to take
pictures with the 2-second or 10-second built-in timer.
1. Set the camera mode to .
2. Press the
button.
3. Press up or down button to select “Self
timer”
4. Press the right button to enter submenu.
5. Press up or down button to select one
desired setting.
AUTO
2816x2112
SUPER FINE
NORMAL
OFF
1/3
OFF
2 SECONDS
10 SECONDS
CONT. SHOT
OFF Disable the self-timer function
2-second self-timer indicates a countdown of two seconds. The Self-
timer LED will blink for two seconds before the picture is taken.
10-second self-timer indicates a countdown of 10 seconds. The Self-
timer LED will blink slowly for eight seconds and then quickly for two
seconds before the picture is taken.
CONT. SHOT Continuous shooting function lets you take up to a certain
number of pictures in quick succession.
To Next Page
Loading...
