63Polaroid Digital Camera User Guide
www.polaroid-digital.com
• Viewing Pictures and Video Clips on a TV(LCD/NTSC/
PAL)
Setting Video System
The video output signal (NTSC or PAL) can be switched to accommodate
different signal systems. For example, NTSC for U.S.A., Canada, Taiwan,
Japan, and so on, and PAL for Europe, Asia (excluding Taiwan), and so on.
You can choose the video output system according to the following steps:
1. Follow the guidelines in “Setup Menu” on page 17 to access the SETUP
menu.
2. Press the down button until VIDEO SYSTEM
bar is highlighted.
DATE TIME
AUTO POWER OFF
BEEP SOUND
VOLUME
VIDEO SYSTEM
1/3
3. Press the right button to access the VIDEO
SYSTEM submenu.
4. Select the video system using the up or right
button. Press the
button or right button to
con rm your choice and exit from the menu
window, press the left button to give up
con rmation and return to the main menu.
LCD
NTSC
PAL
NOTE:
This setting is only available when the
camera is connected with the TV via the
video cable.
To Next Page
Loading...
