66 Polaroid Digital Camera User Guide
www.polaroid-digital.com
67Polaroid Digital Camera User Guide
www.polaroid-digital.com
Selecting PictBridge Mode
1. Set the camera mode to
.
2. Press the
button to access the main menu.
3. Press the down button to select the
PICTBRIDGE option.
2/2
DPOF
PICTBRIDGE
SETUP
PICTBRIDGE
PICTBRIDGE
4. Connect the camera with the printer via a USB cable.
5. Press the right button.
PLEASE
CONNECT TO DEVICE
PICTBRIDGE
PICTBRIDGE
NOTE:
To print a single image, select the image before
enabling PictBridge mode.
Camera/Printer Connection
Connecting with the USB Cable.
To Printer
1. Plug Series A of the USB cable into the marked socket on your printer.
Location of USB socket will vary from printer to printer.
2. Plug AV/USB/DC of the USB cable into the port on your camera.
PLEASE
CONNECT TO DEVICE
DEVICES
IS CONNECTED
THIS IMAGE
ALL PRINT
ALL INDEX
PICTBRIDGE
PICTBRIDGE
NOTE:
• “ DEVICE IS CONNECTED” displays on the LCD screen, indicating a proper
connection to the printer.
• Do not connect the USB cable to the camera until PictBridge is enable and when
prompted by the “PLEASE CONNECT TO DEVICE” screen. Or if you already
have connected the cable to the camera, do not plug into printer until prompt to
do so. Not following this sequence will result in connection failure.
To Next Page
Loading...
