Page 2
1
2
1
2
3
4
5
1
2
3
3
2
1
Slide the cleaning roller onto the cleaning
sleeve (1). Remove the protective wrap from the
cleaning roller (2) and install the cleaning roller
in the printer (3).
Load ribbon on the ribbon cartridge.
Load the ribbon cartridge in the printer.
Close the printer cover.
Open the input hopper and load cards.
Close the input hopper.
Plug the printer power supply
into the printer (1).
Connect the power cable to
the power supply (2) and to an
outlet (3).
Wait for the Ready light on the
LCD panel to turn green.
Open the printer cover.
To Next Page
Loading...
