Polaroid PDC 3000 - Operating the Camera from the Powermac;Powerpc

Using the PDC-3000 with your PowerMac/PowerPC 146
Operating the camera from the PowerMac/PowerPC
If the camera is connected to the computer, you can control
the camera with the mouse and the keyboard, and you can
display a “live” viewfinder image on your computer screen.
This is useful if you use the camera in a stationary setting.
To take pictures using the computer:
1 Connect the camera to your computer. If necessary, see the
PDC-3000 User’s Guide.
2 Turn on the camera.
3 Turn on the computer.
4 Start an image-processing application compatible with
Photoshop plug-in modules or start Polaroid PDC Direct.