Polaroid PDC 3000 - Restoring Computer Control

Using the PDC-3000 with your PowerMac/PowerPC 158
After releasing the camera from computer control as
described above, you can place the camera back under
computer control with these steps:
1 Start your image-processing application or PDC Direct.
2 If you are using PDC Direct, skip to step 3.
If you are using an image-processing application, choose
Acquire from the File menu, then choose PDC.
3 If the Take Pictures window is not visible, click the Take
Pictures button to display it and restore camera control to the
computer.
Restoring computer
control