Setting up 32
Connecting the camera to your PowerMac or PowerPC
The PDC-3000 camera is an internally terminated SCSI
device designed to connect to the SCSI port of your
PowerMac or PowerPC computer. How you connect the
PDC-3000 depends on whether you have other SCSI devices
connected to your computer.
Be sure to set the camera’s SCSI ID as described on page 24
before connecting the camera.
WARNING: IF YOU ARE CONNECTING THE PDC-3000
TO AN APPLE POWERBOOK COMPUTER, READ
"CONNECTING TO AN APPLE POWERBOOK" ON
PAGE 36 BEFORE CONTINUING.
To Next Page
Loading...
