Setting up 52
Verifying camera internal settings from your PC
The PDC-3000 camera stores the following settings in its
internal memory:
· User name
· Default picture label
· Camera sound indicator status
· Current date and time
· Image compression mode
· Automatic shutoff timeout values
Before using the PDC-3000 camera for the first time, verify
(and change, if necessary) these settings by following
instructions in Changing operating preferences on page 198.
After verifying the camera’s internal settings, proceed as
follows:
If you intend to take pictures with the camera disconnected
from the computer, close your image-processing application
by choosing Exit from the File menu. Then turn off the
computer and the camera, and disconnect the camera as
described below. Refer to Using the PDC-3000 camera on
page 56 for picture-taking instructions.
To Next Page
Loading...
