Polaroid PDC 3000 - Disconnecting the Camera from Your Computer

Setting up 53
If you wish to take pictures while using the computer to
control the camera, leave the camera connected to the
computer. Refer to Using the PDC-3000 with your PC on
page 159.
Disconnecting the camera from your computer
If you want to take pictures with the PDC-3000 camera away
from the computer, use the following steps to disconnect it.
Note: The procedure below disconnects the camera cable
from the computer. To use the camera controls for taking
pictures without disconnecting the camera from the
computer, see Releasing the camera from computer control
on page 157 (PowerMac/PowerPC) or page 205 (PC) instead.
1 Turn off the computer.