Polaroid PDC 3000 - Turning on the Camera

Using the PDC-3000 camera 74
To turn on the PDC-3000 camera, press the Power button
(a).
08b.CDR
When you press the Power button, the camera performs a
brief self-test, accesses the CompactFlash card (if one is in the
camera), then displays a normal LCD panel. If the sound
indicators are enabled, the camera also emits a short, high-
pitched tone to indicate that it passed the self-test and is
ready to take pictures.
If the camera detects any problems or errors during its self-
test, it displays an error message on the LCD and emits one
or two short, low-pitched tones. (For more information about
error messages, see Troubleshooting error messages on page
223.)
Turning on the camera