Inserting a SD (not included)
Turn off the camera and open the SD slot cover as illustrated. Insert the
SD ensuring the card is inserted the correct position as illustrated. On the
inner side of the SD slot cover, there is a diagram showing the proper
insertion orientation.
Notched corner
of SD card
NOTE:
The camera will turn off automatically if you insert the SD card while the
camera is turned on.
Removing the SD (not included)
To remove the SD, turn off your camera , open the SD slot cover, gently
push the SD inwards and then release it for the SD to eject. Take the SD
out and close the card slot cover.
To Next Page
Loading...
Need help?
General
